skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 204331a ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? may 25, 2017 1 data sheet awb7132: 2.30 to 2.40 ghz small-cell power amplifier module applications ? lte, wcdma and hsdpa air interfaces ? picocell, femtocell, home nodes ? customer premises equipment ? data cards and terminals features ? ingap hbt technology ? C47 dbc acpr @ 10 mhz, +24.5 dbm ? 29 db gain ? high efficiency ? low transistor junction temperature ? matched for a 50 system ? low profile miniature surface-mount package; rohs comp liant ? multi-carrier capability ? surface-mount (14-pin, 7 ? 7 ? 1.3 mm) package (msl rating tbd, 260 ? c per jedec j-std-020) s kywork s g reen tm product s are compliant with all applicable legi s lation and are halogen-free. for additional information, refer to skyworks denition of green tm , document number s q04C0074. description the awb7132 is a highly linear, fully matched, power amplifier module designed for picocell, femtocell, and customer premises equipment (cpe) applications. its high-power efficiency and low adjacent channel power levels meet the extremely demanding needs of small-cell infrastructure architectures. designed for lte, wcdma, hsdpa air interfaces operating in the 2.30 ghz to 2.40 ghz band, the awb7132 delivers up to +24.5 dbm of lte (e-tm1.1) power with an acpr of -47 dbc. the device operates from a convenient +4.2 v supply and provides 28 db of gain. the device is manufactured using an advanced ingap hbt mmic technology offering state-of-the-art reliability, temperature stability, and ruggedness. the self-contained 7 mm x 7 mm x 1.3 mm surface-mount package incorporates rf matching networks optimized for output power, efficiency, and linearity in a 50 system. a block diagram of the awb7132 is shown in figure 1. the device package and pinout are shown in figure 2. signal pin assignments and functional pin descriptions are described in table 1. downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 may 25, 2017 ? skyworks proprietary inform ation ? products and pro duct information are subject to change without notice ? 204331a s upply voltage s upply voltage rfoutput matching network matching network bia s c ontrol bia s c ontrol rfinput 204331-001 figure 1. awb7132 block diagram 12 3 4 5 6 7 1413 12 11 10 98 g nd g nd rfoutv cc 2 g nd g nd g nd vref g nd g nd v cc 1 rfin n/ c n/ c g nd 204331-002 figure 2. awb7132 pinout (top view) table 1. awb7124 signal pin descriptions pin name description pin name description 1 vref reference voltage 8 gnd ground 2 gnd ground 9 gnd ground 3 gnd ground 10 gnd ground 4 vcc1 supply voltage 11 vcc2 supply voltage 5 rfin rf input 12 rfout rf output 6 n/c no connection 13 gnd ground 7 n/c no connection 14 gnd ground downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 204331a ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? may 25, 2017 3 electrical and mechanical specifications the absolute maximum ratings of the awb7132 are provided in table 2. recommended operating conditions are specified in table 3, and electrical specifications are provided in table 4. table 2. awb7132 absolute maximum ratings 1 parameter minimum maximum units supply voltage (vcc) 0 +5 v reference voltage (vref) 0 +3.5 v rf output power (pout) +28 dbm, modulated storage temperature (tstg) -40 +150 c electrostatic discharge: human body model, class 1c 2 charged device model, class 4 3 2000 1000 v v 1 exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. exceedi ng any of the limits listed here may result in permanent damage to the device. 2 jedec js-001-2010. 3 jedec jesd22-c101d. esd handling : although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this device must be protected at all times from esd when handling or transporting. static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd handling precautions should be used at all times. table 3. awb7132 recommended operating conditions 1 parameter symbol min typ max units operating frequency f 2300 2400 mhz supply voltage v cc +3.2 +4.2 +4.5 v reference voltage: pa on pa off v ref +2.80 0 +2.85 +2.90 +0.5 v v rf output power 2 p out +24.5 dbm case temperature 3 t c C40 +85 c 1 the device may be operated safely over these conditions; howe ver, parametric performance is guaranteed only over the condition s defined in the electrical specifications. 2 typ rf output power is used during production test. 3 case temperature references the b oard temperature at the ground paddle on the backside of the package. downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 may 25, 2017 ? skyworks proprietary inform ation ? products and pro duct information are subject to change without notice ? 204331a table 4. awb7132 electrical specifications 1 (t c = +25 c, v cc = +4.2 v, v ref = +2.85 v, 50 system) parameter symbol test condition min typ max units gain 2 g 27 29 34 db acpr: 1,2,3 @ 10 mhz offset @ 20 mhz offset 10 mhz lte bw C47 C58 -45 -50 dbc dbc power-added efficiency 1,2,3 16 19 % thermal resistance r jc junction to case 21.8 c/w supply current 1,2,3 vcc total through vcc pins 295 350 420 ma quiescent current icq 95 125 155 ma reference current through vref pin 5 6.5 8 ma leakage current vcc = +4.5 v, vref = 0 v 1.5 5 a harmonics: 2fo 3fo, 4fo -55 -58 -40 -45 dbc dbc input return loss 10 15 db p1db cw tone 33 dbm rf switching time: 4 rise time (pa off to on) fall time (pa on to off) v cc = +4.2 v, vref switched between 0 v and +2.85 v 12 4 s s spurious output level (all spurious outputs) p out +24.5 dbm, in-band load vswr < 5:1, out-of-band load vswr < 10:1, applies over all voltage and temperat ure operating ranges C60 dbc load mismatch stress with no permanent degradation or failure vcc = +4.2 v, p in = +0 dbm applies over full operat ing temperature range 8:1 vswr 1 measured at 2350 mhz. 2 p out = +24.5 dbm. 3 e-tm1.1 lte 10 mhz bw. 4 rise time defined from time at which v ref is switched from 0 v to +2.85 v, to time at which the rf out put power achieves 90% of the aver age steady-state on level; fall time defined from time at which v ref is switched from +2.85 v to 0 v, to time at which the rf out put power decreases to 10% of the average steady-state on level. downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 204331a ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? may 25, 2017 5 evaluation board description the awb7132 evaluation board is used to test the performance of the awb7132 device. a schematic of a typical application circuit is shown in figure 3. shutdown mode the power amplifier can be placed in shutdown mode by applying logic low levels (see operating ranges table) to the v ref voltage. 0.1uf 100 uf g nd at s lug rf input g nd v cc 2 vref n/ c g nd rfin v cc 1 2 rf output 1000 pf rfout g nd n/ c 34 5 6 7 98 1410 11 12 13 g nd g nd v cc 2 10uf 0.1uf vref v cc 1 10uf 1000 pf 0.1uf 100uf awb 7132 1 tv s diode tv s diode notes:1. applications that have large supply voltage transients may benet from the use of tvs diodes. for such applications, recommended tvs diodes are sm05t1g or smj5.0a. 2. to achieve the rf switching time specications listed in table 4, the maximum recommended capacitance on the vref line is 0.01 f. the noise on the vref line should be kept as low as possible to minimize required capacitance. g nd 1000 pf g nd 100 uf 204331-003 x x vref capacitor s ( s ee note 2) figure 3. awb7132 evaluation board schematic package dimensions the pcb layout footprint drawing for the awb7132 is shown in figure 4. typical part markings are shown in figure 5. the package dimensions for the awb7132 are shown in figure 6. the tape and reel dimensions are provided in figure 7. package and handling information since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the awb7132 can be used for lead or lead-free soldering. for additional information, refer to the skyworks application note, solder reflow information , document number 200164. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. downloaded from: http:///
preliminary data sheet ? awb7231: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@sk yworksinc.com ? www.skyworksinc.com 6 may 25, 2017 ? skyworks proprietary inform ation ? products and pro duct information are subject to change without notice ? 204331a notes: 1. unless specied, dimensions are symmetrical about center lines shown. 2. dimensions are in millimeters. 3. vias shown in pcb metal view are for reference only. number and size of thermal vias required are dependent on heat dissipation requirements and the pcb process capability. 204318-004 figure 4. awb7132 pcb layout footprint dimensions downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 204331a ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? may 25, 2017 7 b7132 bbbb c ountry c ode lot number pin 1 part number date c ode: yy = year ww = work week marking c ode 204331-005 figure 5. awb7132 typical part marking 7.00 0.10 7.00 0.10 1.32 0.10 0.275 5.40 6 .80 0.10 typ (pull back) 1.0 6 7 pin 1 204331-00 6 0.400 0.025 notes: 1. all dimensions are in millimeters. 2. unless specied otherwise, tolerance = 0.076 [0.003]. 3. pads (including center) are shown as uniform size for reference only. actual pad size and location will vary within the minimum and maximum dimensions according to the specic laminate design. pin 1 0.10 [0.004] 0.400 0.025 figure 6. awb7132 package dimensions downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 8 may 25, 2017 ? skyworks proprietary inform ation ? products and pro duct information are subject to change without notice ? 204331a pin 1 204331-007 all dimensions are in millimeters. figure 7. awb7132 tape and reel dimensions downloaded from: http:///
data sheet ? awb7132: 2.30 to 2.40 ghz small-cell power amplifier module skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 204331a ? skyworks proprietary information ? products and product in formation are subject to cha nge without notice ? may 25, 2017 9 ordering information model number package description component packaging AWB7132P8 rohs-compliant 14-pin 7 x 7 x 1.3 mm surf ace-mount module 2500-piece tape and reel evb7132 evaluation board part number copyright ? 2017 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any kind, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequential damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products, which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trad emarks of skyworks solutions, inc., in the united states and other countries. third-party brands and names are for identification purposes only, and are the pr operty of their respective owners. additi onal information, including relevant terms and conditions, posted at www.skyw orksinc.com, are incorporated by reference. downloaded from: http:///
|
